Your cart is empty.
Your cart is empty.Product Description
All da' reviewz
August 21, 2025
I often recycle, rebuild, and upgrade grills and smokers that people are throwing out, and that naturally involves a lot of stripping the paint and rust off the body, maybe a bit of welding, then repainting. So I tend to go through a lot of these stripping wheels and flapper disks. There really isn't much to review here. I could go on for hours about the specifics of various abrasives for different types of jobs, but most folks who use these already know all that, so they're really just interested if these disks work well and have enough load of abrasive to get your money's worth of clean metal before the disk wears down, and these definitely do. I just recently stripped a fairly good sized grill with a side firebox and cast iron grates, down to shiny bare metal in about 20 minutes, with a single disk, and I still have a bit of disk left, which I'll probably use to clean up some square tube to weld on for some new legs. Overall, these disks do everything I need and I haven't had any problems with them after going through 2 of them so far. Seems really solid to me.
bravocharleywindsor
August 15, 2025
These are good aggressive disks for stripping paint, crud, rust, etc. That last relatively well and do a great job.
moose
July 11, 2025
I absolutely love these things. It is one of my favorite grinder attachments. I've used a lot of wire wheels, and I hate them. I always get wires flying back and hit me in the face. I've been cut pretty good. Pretty much anything I'd use a wire wheel for I could use this disc and it probably does a better job in all the situations. It will take off car paint down to bare metal instantly, it can refinish the metal surface that had some Rust, it's my go-to tool for removing Mill scale on mild Steel. This is much nicer to the surface of the metal than a flap disc if your goal isn't to remove any metal. There's a few colors of these and honestly I can't find a good answer to what the differences are between them. I've used these and the purple a bunch and they don't feel hardly any different.
Hippy Bryan
June 27, 2025
I've used similar discs in the past but thought I'd give these Vantego discs a try. I feel like they are more suited for some kind of mini grinder which I've never run into. I tried these discs with a couple of my 4 1/2" die grinders, trying to see if they would seat properly. The center hole is only 5/8", not as large as the normal 7/8" arbor. While they did seem to mount securely and center without undue vibration, it doesn't seem very safe to use like that. The outer diameter is also mini, measuring less than 3 7/8" instead of my other 4 1/2" discs. While this small size permits them to be used in some tight situations where larger wheels won't fit until worn down, they feel undersized compared to regular sized wheels. In use, they work well to remove finishes and light rust. I find these wheels work great for cleaning up aluminum edges and welds. They're less aggressive than a grinding disc or flap wheel, and can conform well into corners. They don't last very long when polishing welds, but result in a nice clean surface. I've also used them to strip wood, and they don't tend to burn the wood like flap wheels can. The flat face of the discs with recessed grinder nut means they can be pushed flat against a plate for a quick polish before painting. While these are useful and mostly as described, they are slightly under the stated measurement and I'd recommend getting a larger size. And definitely make extra sure that a 5/8" hole size is appropriate for your grinder before ordering these.
Jeff
March 20, 2025
These are great for removing rust from metal before painting. Easily fits my grinder and holds up well to use.
Mark Perrenoud
March 12, 2025
I have a lot of paint stripping to doAnd this little set honestly is pretty good.They wear down slow enough, aka last long enough.Work fine.Only 2 issues is they are made for a 4" angle grinder, which no stores carry anymore, and no where does this tell you the grit of these wheels.They work, but that information is pretty important.Personally I have an adapter to drill for these, but you will need an adapter of some type to use as they are 5/8 arbor and 4.5 inch angle grinders use a 7/8 arbor.
Shannon & Ricky
January 30, 2025
The Paint Stripper Discs are a fantastic addition to my toolkit for rust and paint removal. At 4 inches in size, they fit perfectly on my angle grinder and deliver impressive results on both metal and wood surfaces.Each disc is durable and provides efficient sanding and grinding, making the tough job of stripping paint much easier. The 5-pack ensures I have plenty of discs on hand for various projects, which is a big plus. Overall, these discs are reliable and effective, making them a great choice for anyone looking to tackle paint or rust removal. Highly recommended!
Stacy Lackie
January 28, 2025
I run these in a 4 1/2 inch grinder and they hold up to the high RPM without coming apart. Takes the paint off within seconds and leaves a nice prepped surface ready for welds and or paint.So far with all the polishing I have done I have only burned up one wheel and the second one looks almost new.These are a great drop into your grinder to strip paint and or rust verses a Flapper wheel that might leave low spots if you're not careful.I would recommend giving these a try and see if they make your job easier, end of the day isnt that what you want, an easier job.
Recommended Products