Your cart is empty.
Your cart is empty.Product Description
Maximum Reach
- Makes it fast and easy to loosen and tighten hose clamp nuts
- Works on 5/16 in. and 1/4 in. standard and mini clamps
- 6-inch spring steel flex shaft reaches and turns clamp nuts almost anywhere
- Comfortable dual-density handle offers grip and control
- Wrench flats on shaft bolsters for extra torque when needed
MIKE G.
2025-07-01 13:59:45
Works as it should. Will take a while to determine durability. Bought it and screw tipe clamps because spring clamps tend to piss me off.
Charles E. Walker Jr.
2025-06-20 17:06:25
Worked Excellent.Highly Recommended tool.
Matt
2025-06-16 14:28:49
Works very well as designed- only complaint is that the bit at the end falls off easily and I ended up losing mine because of that.
RSTestedSalami
2025-06-09 11:50:34
makes it easy to do these clamps. a must have tool.
reevescr
2025-06-02 12:39:05
The tip did not hold the bits in place. Not magnetic or any spring clip. I had to tape the bit in place to use the flex driver in a down position.
Rebecca
2025-05-30 16:53:52
This is a must have for any boat owner. Reaches into tight spaces and allows loosening or tightening of hose clamps even when you don’t have a straight shot. Long enough to give good reach.
Customer
2025-05-20 15:29:50
After one use the bit won’t stay secure on the tool. Lost bit on 2nd use because there was no tension to hold it; so tool was in trash a week after buying.
M
2025-04-06 10:12:28
Worked as intended, very useful
MIKE G.
2025-03-24 14:38:11
Works as it should. Will take a while to determine durability. Bought it and screw tipe clamps because spring clamps tend to piss me off.
Charles E. Walker Jr.
2025-02-16 14:14:04
Worked Excellent.Highly Recommended tool.
Matt
2025-02-14 12:19:02
Works very well as designed- only complaint is that the bit at the end falls off easily and I ended up losing mine because of that.
RSTestedSalami
2025-02-12 16:59:35
makes it easy to do these clamps. a must have tool.
reevescr
2025-01-17 15:01:15
The tip did not hold the bits in place. Not magnetic or any spring clip. I had to tape the bit in place to use the flex driver in a down position.
Rebecca
2025-01-02 16:55:24
This is a must have for any boat owner. Reaches into tight spaces and allows loosening or tightening of hose clamps even when you don’t have a straight shot. Long enough to give good reach.
Customer
2025-01-01 11:19:36
After one use the bit won’t stay secure on the tool. Lost bit on 2nd use because there was no tension to hold it; so tool was in trash a week after buying.
M
2024-12-25 13:24:18
Worked as intended, very useful
Recommended Products