Your cart is empty.
Your cart is empty.Product Description
632-86127 features: -designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass, and plastic tubing. -Strong, lightweight slide and wheel housing, large knurled feed screw knob gives wasy control of cutting pressure for clean cuts. -The model 117 features a special knob for easier tightening of the feed screw. -Std. Wheel: E-3469. Cutters: -tubing cutters. Multi-use: -Yes. Quantity: -single. Generic Specifications: -The model 117 and 118 have all of the features on the no. 101 plus a self-feeding Cutter wheel that automatically cuts after tightening the knob only Once. Dimensions: overall product weight: -0.27 pounds.
From the Manufacturer
Since 1923, Ridgid has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the Ridgid brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. The Ridgid 86127 close quarters quick-feed cutter is specifically designed for use in restricted spaces on hard and soft copper, aluminum, brass and plastic tubing. It has a strong, lightweight slide and wheel housing with a large knurled feed screw knob that gives the user easy control of cutting pressure for cleaner cuts. It includes a self-feeding cutter wheel that automatically cuts after tightening the knob only once.
Gregory Griffin
August 20, 2025
Product better than expected quality and easy to use every day. I use daily with no issues, will purchase again when needed
Clement
July 14, 2025
When used as described in the instructions, this pipe cutter works perfectly. The proper way to use it is to place the cutter on the pipe, with the pipe making contact with the two rollers and turn the screw until the cutting wheel makes contact with the pipe. Then turn the screw two full turns (thus loading the spring). Then simply revolve the tool around the pipe until it is cut through. Works like a champ without crushing or deforming the pipe. Works great for close quarters.
MIke B,
July 12, 2025
I had to borrow one, it was also a rigid, liked it, so bought the same for my tool box.
Jeffrey
July 11, 2025
seems durable and cuts great! lost my hilmor set so used a chinesium one for a bit but this one is waaaaaaay better!
Mike
June 20, 2025
Pretty good cutter. I use these cutters almost every day and this one is on par or better than most. However, I deducted a star because the pictured item shows a machined alloy knob and is not the one received. I will say that the new knob may be an ergonomic and functional improvement. Probably just an old picture but I would prefer a non painted knob.I have to say that the lever spring is a good design and I have found it useful already. I recommend tightening just enough to get a good score mark and then cranking it down to let the spring work for you. Other reviewers have stated that tightening enough for the spring to advance the cutter may deform the pipe or make it too difficult to turn the cutter. I have not found this to be the case and I do like the spring action. We will just have to see how the memory of the spring holds up over time.This cutter is still overpriced in my opinion and should probably be in the $15 range.
Shane
May 15, 2025
I do hvac for a living, have had many tubing cutters and almost all of them are just okay, and some suck.... my milwaukee cutter is one of my least favorites even being a milwaukee guy. The spring on this makes it so you can clamp down on the tube pretty good and the spring actually pushes the blade in while you rotate it if that makes sense. Ive had many cutters that start to thread the pipe rather than cut it. This does not do that. Highly recommend
Euchan Dongo
April 22, 2025
1 of my favorite right space cutters EVER!!!!
William Collins
April 8, 2025
Easy to use and cuts copper pipe with ease.
jamie
March 20, 2025
Well built and works like a charm
Gabriel
March 4, 2025
Ferramenta resistente, corta eletrodutos de 3/4 zincado com facilidade. Para tubos de plástico utilize outra ferramenta.
Customer
February 12, 2025
Very good construction and cuts 28mm which is why I bought it for
mac
January 19, 2025
This is my second of this model. They are great. Not sure I could go back to a non spring loaded imp cutter. Great for refrigerant piping.
Adam koenigsegg
January 3, 2025
What a great little cutter! I thought it was a bit pricey, but, good ain't cheap, and cheap ain't good. This is good.
Recommended Products
$15.68
$ 6 .99 $6.99