Your cart is empty.
Your cart is empty.Keep water pressure regulated in any commercial or residential setting with this direct pressure regulating valve. This pressure-regulating valve helps to regulate downstream pressure in commercial and residential water applications and features a patented half-cartridge design that enables servicing without having to remove the valve body. This water pressure regulating valve features an innovative push-to-connect design which allows for quick and easy installation and does not require any additional tools. Ideal for use in tight spaces, this pressure regulator can be installed on wet lines. The water pressure regulator is rated to 45 PSI, easily adjustable between 10 to 70 PSI, and is compatible with PEX, copper, CPVC, PE-RT, and SDR-9 HDPE pipe.
DJA
2025-08-28 18:47:23
As with all Sharkbite items this was easy to connect and works great. Unfortunately, my last pressure valve from Sharkbite went bad after only 7 years. I think the major issue was that because it can rotate in the fittings it eventually flipped upside down and rusted at the pressure valve. I'm not sure if that's a common problem, but this time I ran a strap around it and fastened it so that it'll stay right side up.
Customer
2025-08-17 10:38:26
Easy installation and is working great……good price too.
K. Christensen
2025-08-16 10:41:32
It was weird when I first installed it the pressure dropped to the preset 50 PSI but then started creeping up and hitting the street pressure of 100 PSI. We have a Moen Flo automatic shut off (which is how we found we had too high of water pressure) so at first, I thought it was a Flo issue, but it seemed to be working fine. So, I ordered a replacement December 14, but today December 18, the PRV started working like it should. All I can figure is either something washed into it or it needed to run awhile to break in. I suspect something got lodged in the gasket after water was restored and worked itself out. Anyway I will just be sending back replacement unopened as the unit we have seems to be working great now. I am a fan of shark bites which made it very easy to install (and replace if I ever need to).
Holzholländer
2025-08-13 10:14:25
I installed this to reduce the high water pressure in my house.As my filtration system has a max of 60 PSI and the incoming water pressure is also 60 PSI, I wanted to reduce the pressure. Easy process : Closing main valve - cutting the PEX pipe - installing Pressure Regulating Valve - opening main valve: Finished!!
Saturnino
2025-08-07 14:53:01
Buen producto hizo su trabajo y a buen precio
Kyle
2025-07-18 11:05:58
My old pressure regulating valve was tired and needed to be replaced. I cut the old one out and soldered hard copper with couplers to my soft copper pipes. Sharkbite requires hard copper pipe when being used with it's fittings. I combined this pressure regulating valve with a sharkbite slip valve for ease of replacement in the future. After my work had been done there was a problem with the static pressure of the valve.I ordered another one of these valves and planned to return the defective one once I had the replacement in hand. Thankfully my prep work allowed me to replace the defective valve with the replacement within 2 minutes and I was done.Please read the proper way to use sharkbite fittings. Prep work is important, deburr your pipes (inside and outside), make straight cuts, ensure they go to the correct depth, and you'll be golden.
T 64
2025-07-17 12:06:58
Home pressure 80, so I try to reduce it with this because easy connect/ shark just cut the pipe. But reduce it to 70 as factory adjust I agree with that but when you flush toilet and use any faucet go down to 30. / try to return but already connected need to replace easy for me.
DanO
2025-06-16 14:09:23
Ease oh use connecting to my shark bite connectors. Clear arrow direction of the water flow on the brass base.
Bass
2025-05-01 17:37:13
The Pressure Regulating Valve was very easy to install and works as expected.
James Everard
2025-04-11 15:53:25
Excelled in what I was looking for
Glo
2025-03-12 14:56:00
As advertised.
Gary Peplinskie
2025-03-02 17:21:16
Quick resolve, water pressure control, and ease of install
MacGuyver
2025-02-18 10:29:30
Shark bite connectors are slick.
Recommended Products
$257.40
$ 99 .00 $99.00
$99.99
$ 38 .99 $38.99