Your cart is empty.
Your cart is empty.SharkBite Max 1/2 Inch x 3/4 Inch FIP x 18 Inch Stainless Steel Braided Flexible Water Heater Connector, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR3068FX18
TzTerri
2025-08-03 10:30:17
I couldn't find a half-inch to three-quarter locally but Amazon had it and it was delivered quickly.I put the original water heater in in 2005 so it was time to replace it.Last time I soldered all the connections. But this time I used Sharkbite plus added an expansion tank and gauge.First time using them. I followed the instructions about using the deburring tool and marking off the correct depth. It worked perfectly the first time no leaks. I was amazed.
Bigdaddy SS
2025-08-01 13:34:04
Just what I needed, easy install.
Dillon
2025-07-22 18:28:31
Worked for my needs
Peyton McAlister
2025-06-26 13:36:28
the easiest way to make a spout on pex line. Super simple just push on and twist. Have used this for months and have had no leaks
Robert
2025-06-23 17:33:44
The key to using these Shark Bite fittings is preparation. Make sure to lightly clean the pipe ( not necessarily to solder clean), deburr the inside and outside of the pipe edges and mark and accomplish the insertion depth to spec. NOTE: the insertion depth for the 1/2 and 3/4 max fittings is slightly more than the old insertion tool deburr/ depth gauge provided by SB . I bought this to hook up the hot water line to my new tank. You should not solder anywhere near the dielectric nipples on the tank. I have used SBs for over 15 years and no leaks anywhere . Getting them apart can be a hassle so I bought the special ( and expensive) SB pliers.
Christopher E. Colby
2025-06-13 17:00:21
This product was easy to setup, but I did not hook it up to a water heater but to the out spout of a laundry system. It ended up leaking but not at the connection part but right under it. Tightening or loosening did nothing as it was not the connection I ended up having to buy an addition 3/4 gasket and that solved everything. I expect because the water heater has a longer connection port than a standard laundry spout.
Joe T
2025-05-19 15:13:46
Quick shipping and arrived undamaged.
Sam
2025-03-17 16:36:51
Just what I needed
Tony Roussy
2025-03-13 14:40:39
Utilisation au Chalet pour raccordement du chauffe-eau au propane.Bonne flexibilitéAucune fuiteJe recommande
W C Fields
2025-03-05 11:26:10
caution these little darlings keep trying to escape there connections
Danielle Todd
2025-01-08 13:15:56
Réservoir à eau chaude.
Paul A.
2024-12-19 10:11:24
clean the copper and no need to solder, easy-peasy
Raymond Cor
2024-12-18 11:42:37
C'est très facile à utiliser et d'une bonne qualité
Recommended Products
$27.60
$ 11 .99 $11.99