Your cart is empty.
Your cart is empty.Walnut Hollow-Hot Stamps Number & Symbol Set. Hot stamp on wood, paper, leather, fabric and more! Individual metal hot stamps can be attached to any Walnut Hollow hot tool by screwing on and off with pliers (tools sold separately). Use to personalize any project. This package contains twenty-four number and symbol HotStamps. Imported. WARNING: This product can expose you to lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Billy
2025-09-03 13:13:35
I bought these to personalize a gift and they were great. The characters themselves have enough depth that you dont see thr negative space around them. They are sturdy, fit into the burn tool easily, and are just a beautiful and timeless way to make something unique.
Dennis
2025-08-17 17:50:49
These heat and cool quickly. I used for 500 times with no difficulty even though it was my first time using this product.
Alex G. Dulude
2025-08-04 10:49:01
First: these work well. They fit in a standard size woodburning pen and thread in nicely. They’re deep enough that you get a food image transfer and the material heats up fast and even.The downside: they are pretty cheaply made. If you push down with any kind of uneven force, while they’re hot: they will bend. Then they set as they cool and need to be reheated to try and bend the stem back.For the price: I can recommend them, but don’t expect these to last for ever and ever.
James
2025-08-01 14:10:44
.
Engelbrecht
2025-07-22 13:02:23
Great product
Josh K.
2025-07-20 12:23:06
Works great. Just need to work on my alignment and lines though. ðŸ˜ðŸ˜
modelerman
2025-07-16 13:37:53
Great addition to a wood burning kit's points.
Derek
2025-06-23 12:16:18
These numbers were recommended to me based on buying the alphabet characters from the same brand. But when I received them, these were much larger and I couldn’t use them.
Macarena Castellanos
2025-06-20 18:47:43
So pretty!!! I love them... great to work with!!! They have beautifull shapes to create various designs and work in wood or leather... higly recomend it! but use heath resistant gloves
J James
2025-06-17 18:06:10
These work great in my walnut hollow tool. I have another brand with a bright red handle and while they work with it, I can not screw them in all the way. So it will take longer to heat up, and you have to hold it on the wood longer to get the same level of darkness. I use them to make Clocks and signs. You need to rock the numbers around a wee bit to get all parts to make contact.
Billy
2025-06-03 10:59:56
I bought these to personalize a gift and they were great. The characters themselves have enough depth that you dont see thr negative space around them. They are sturdy, fit into the burn tool easily, and are just a beautiful and timeless way to make something unique.
Dennis
2025-05-28 09:22:50
These heat and cool quickly. I used for 500 times with no difficulty even though it was my first time using this product.
Alex G. Dulude
2025-05-27 15:18:46
First: these work well. They fit in a standard size woodburning pen and thread in nicely. They’re deep enough that you get a food image transfer and the material heats up fast and even.The downside: they are pretty cheaply made. If you push down with any kind of uneven force, while they’re hot: they will bend. Then they set as they cool and need to be reheated to try and bend the stem back.For the price: I can recommend them, but don’t expect these to last for ever and ever.
James
2025-05-23 12:21:30
.
Engelbrecht
2025-05-21 10:10:22
Great product
Josh K.
2025-05-14 17:49:41
Works great. Just need to work on my alignment and lines though. ðŸ˜ðŸ˜
modelerman
2025-05-11 14:56:16
Great addition to a wood burning kit's points.
Derek
2025-04-20 11:30:32
These numbers were recommended to me based on buying the alphabet characters from the same brand. But when I received them, these were much larger and I couldn’t use them.
Macarena Castellanos
2025-03-15 18:28:06
So pretty!!! I love them... great to work with!!! They have beautifull shapes to create various designs and work in wood or leather... higly recomend it! but use heath resistant gloves
J James
2025-03-10 18:38:55
These work great in my walnut hollow tool. I have another brand with a bright red handle and while they work with it, I can not screw them in all the way. So it will take longer to heat up, and you have to hold it on the wood longer to get the same level of darkness. I use them to make Clocks and signs. You need to rock the numbers around a wee bit to get all parts to make contact.
Giulia
2025-03-04 14:55:26
fantastici! li amo!per tantissimi progetti diversi!
Ms. Karina N. J. Harland
2025-03-03 11:35:18
Work brilliantly just wish you could get them in a bigger size too
Client d'
2025-02-17 12:31:29
Parfait mais il faut être un peu bricoleur Acheteur Français ou alors investir dans un pyrograveur soudeur à filetage diamètre 0,4 j'en ai trouvé un chez Pearl (PHOTO jointe à 17 euros environ) vous pourrez ainsi viser votre alphabet pas complètement mais cela fonctionne très bien.Si vous avez comme moi un pyrograveur type R100, R300 il vous faudra la pointe n°21 (je crois) sur laquelle vous pouvez adapter des marques à chaud ensuite fabriquer de petites pièces d'environ 1,5 à 2cm les percer au diamètre du filetage c'est un peu plus compliqué. A vous de voir.En tout cas cet investissement je ne regrette pas du tout.J'espère que ce commentaire vous sera utile car ces marques sont tout simplement superbes.
Giulia
2025-02-10 10:14:09
fantastici! li amo!per tantissimi progetti diversi!
Ms. Karina N. J. Harland
2025-02-06 10:26:08
Work brilliantly just wish you could get them in a bigger size too
Client d'
2025-01-18 18:39:21
Parfait mais il faut être un peu bricoleur Acheteur Français ou alors investir dans un pyrograveur soudeur à filetage diamètre 0,4 j'en ai trouvé un chez Pearl (PHOTO jointe à 17 euros environ) vous pourrez ainsi viser votre alphabet pas complètement mais cela fonctionne très bien.Si vous avez comme moi un pyrograveur type R100, R300 il vous faudra la pointe n°21 (je crois) sur laquelle vous pouvez adapter des marques à chaud ensuite fabriquer de petites pièces d'environ 1,5 à 2cm les percer au diamètre du filetage c'est un peu plus compliqué. A vous de voir.En tout cas cet investissement je ne regrette pas du tout.J'espère que ce commentaire vous sera utile car ces marques sont tout simplement superbes.
Recommended Products
