Your cart is empty.
Your cart is empty.Product Description
MUQZI Bike Fork Mount and Rear Wheel Rack Mount
- HIGH QUALITY - Made of aluminum alloy, with upgraded CNC process, not only durable, but also lightweight.
- UNIVERSAL RACK - This Bike Rack can be used in many vehicles, such as cars, coupes, hatchbacks, SUVs, trucks, etc. Meet your needs for transporting bicycles during road trips or camping hikes.
- Wide Application: The roof rack carrier aims to provide convenient storage and transportation, which can be mounted in the garage, home, or shed for storage.
- SUITABLE FOR - All the adapters included in a small size allow you to take all of them without any burden. Fits for Thru Axles M12x100mm, M15x100mm, M15x110mm and 9x100mm Quick Release Mount.
- APPLY TO - Universally for mountain bikes, road bikes, BMX, etc.
- COLOR - Red/Black
Warm Tips:
1. Please check measurement carefully before purchasing.
2. For front wheel fork mount, only fits for quick release skewer 9x100mm. Or thru axle skewer M12x100mm, or M15x100mm, or M15x110mm.
3. Come with 2 types of mounting screws. Before purchasing, please check if the size of the mounting bolt is suitable for your truck/van/car roof rack.
4. Not suitable for snow bike/fat bike.
5. Any problems, please feel free to let us know, we’ll solve your problems quickly and effectively.
How to quickly check if the product size is suitable for bicycles：
- For front wheel fork mount:
If your bike fork wheel is using quick release skewer, and if the inner hole spacing of you front fork is 100MM, it can be used.
If your bicycle front wheel is using thru axle skewer, you need to measure the length of the front wheel hub and the inner diameter of the hub if is these sizes: M12x100mm, or M15x100mm, or M15x110mm.
- For the rear wheels:
This rear wheel mount is suitable for mountain bikes and road bikes. Not for big wheel like fat/snow bike.
Prince Charming
August 9, 2025
This fit my Fox 36 for spacing with the included bushing spacers. The included attachment hardware was not a practical solution for my installation but they look like good quality hardware, although look too short as well. I mounted it to an aluminum plate about 18†x 8†and the balance is good. The clamping is done by the bike wheel axle so the included clamp would be for a beach cruiser style mount.
Snipe Farmer
May 10, 2025
My girlfriend and I each have road, gravel and mountain bikes. I have a t-slot rail in the back of my truck which has two 9mm QR fork mounts for the road bikes, a 15x100 Thru Axle for her MTB, a 20x110 for my (old) mountain bike and a 12x100 for a gravel bike. I bought this to get a second 12x100 for the second gravel bike.It's nicely made, the adapters are all labeled, and the included t-nuts and bolts made it a breeze to install.Then I went for a ride with a friend with a 15x110 (Boost) MTB. I was able to clamp her bike in this using the correct spacers. And a light bulb went off.I'm getting a second one of these, and I can get rid of (almost) all the others. It will handle the 9mm QR road bikes, the 12x100 gravel bikes, and 15x100 and 15x110 mountian bikes. It won't work with my (2010) MTB with a 20x110 axle (or my fat bike), but it will clean things up a lot.
DB
April 24, 2025
I purchased these for a Trek marlin 4 and a trek marlin 5. I mounted these in the front of my truck bed and although the skewer could be improved by being a little longer for my application, t does work by securing our mountain bikes and appears structurally sound while prividing multiple hub adapters to fit multuple bikes. Universal parts simetimes have there quirks, but tgis would be a good buy as it has multiple fitments.
hi
March 19, 2025
My wife and I have two fat tire electric bicycles. At 65 pounds each I wanted a good reliable safe stable way to mount to my hitch on my motorhome which is like a 3ft by 6ft flat carrier with sides that I sometimes use for hauling coolers or camping gear. I mounted these on opposite sides of the hitch carrier so that all I have to do is take front wheels off each bicycle, mount it on these then just use straps for rear of bikes for extra stability.
Derek
March 13, 2025
I ordered 2 of these, for my Stump Jumper with larger through axle and wife’s Trek with smaller through axle. Works great! Sturdy, quickly adaptable, will recommend.
Travis
February 14, 2025
My bike has a 15x110 thru axle. The QR on the end of the axle (a common length) is too close to the floor to spin 360 deg. when mounted to this, meaning tightening it properly is very difficult.Additionally, the extension pieces to adapt to the fork spacing don't have the 'shoulders' on them to catch the forks properly (like your bike wheels do), meaning you have to awkwardly hold them up with one hand while trying to line up the thru-axle. I ended up 3D printing my own.
Tammy L. Pons
February 7, 2025
This is a good product. The inserts that you use, depending on your axle size and style, are a perfect fit and are kept in place with an 0-ring. The mounting plate is good for any type of installation.You can't go wrong with this mount.
Rob
December 21, 2024
I can see why these are often returned now. A bit narrow to cradle normal mountain bike tires. Fortunately they supplied an extra strap. Will be perfect for road and gravel bikes though.
CARLOS SEBASTIAN ORREGO
December 3, 2024
El precio es excelente, la calidad también y la versatilidad lo mejor.
Recommended Products