Your cart is empty.
Your cart is empty.Product Description
Multi-Purpose Toolwiz 27-42mm Tie Rod End Remover Wrench Tool, Universal Inner Tie Rod Wrench Repair Removal Tools
- Toolwiz inner tie rod tools for cars and trucks help you remove a damaged or broken inner tie rod. The inner tie rod is an essential component of the vehicle's steering.
- When the tie rod fails, you may notice a clunky feel when turning or uneven tire wear. The car won't steer without the tie rod functioning potentially leaving you in a dangerous situation.
- Therefore as soon as the steering has issues and need to be replaced, Toolwiz inner tie rod tools will be the tool easy repair your vehicle tie-rod.
MAIN FUNCTION
It is used for the removal of the direction of the steering rod and it can easily replace inner tie rod ends from 27-42 mm diameter without removing the rack and pinion. Specially designed for 1/2 inch square drive tools.
Inner tie rod wrench 27mm-42mm
27-42 mm diameter without removing the rack and pinion makes this tool both versatile and effective
Tooted Design Anti-slip
Specially designed to be used with 1/2" square drive tools
High quality
CR-V molybdenum steel allows for high hardness, good toughness and long service life
Inner tie rod hex wrench
FEATURES
Used for dismantling steering rod direction, without dismantling rack and pinion, the end of internal steering horizontal tie rod with diameter of 27-42mm can be easily replaced
Designed specifically for the removal of the direction of the steering rod. Easily replaces inner tie rod ends quickly and effectively
Applicable to various vehicles, compatible with Mercedes Benz, BMW, Toyota, Honda, Ford, etc.
PRODUCT DETAILS
- Material: CR-MO chrome molybdenum steel
- Internal Diameter: 27-42mm | 1.06-1.65 inch
- Color: Black
- PACKING INCLUDE: 1x Tie Rod Wrench
twostepper
August 5, 2025
I bought this one by tool whiz as the parts of it that grip are well made. they had others that were cheaper but the teeth that grip didn't look as wellmade as this one. It requires you to use 1/2 inch extentions and a 24 inch breakover bar to help get enough leverage. I used it to remove ineer tie rods on a 2005 pontiac grandprix and it did very well after the learning curve. to install the tie rod just revers the direction you put it on the tie rod so it gets a good grip for installation.
C K
July 26, 2025
I tried a big pipe wrench. I tried all my adj wrenches. I don't really understand why the big pipe wrench didn't work. But this tool did. I didn't even have to position it on the flattened part of the tie rod. It worked on the round part and barely left a mark. It didn't slip at all.On one side, I had a hard time unscrewing it even after I got it moving. This tool is so effective I could just hold it with my hand, slide it 30 degrees at a time, and crank on the breaker bar with a 18" extension on it. It releases to slide and then bites back down no problem.I'm so glad I didn't buy the whole tie rod remover kit with the long sleeves and inserts. Even the traditional version of this where you tighten the two nuts on the u shaped bolt would have been 10x harder to use. This thing is amazing. It's amazing.
Dangel
July 7, 2025
I really had second dought on this little tool. When I tried it, this tool is amazing. Removes inner tie rods with such ease. Size of the tool is even better. Fits literally in your pocket. Very easy to use, and looks very durable.
Balake
June 4, 2025
Used this to do a friends, inner tie rods on his Kia Soul. I typically use my inner tie rod removal kit with all of the different adapters, but I was out of state visiting my friend and told him I would help him fix his tie rods. The tool does work, but it is cumbersome and sloppy. I would never use it if I was planning on doing more than one job. The tool acts similar to a pipe wrench and as you apply pressure, the teeth grip onto the inner tie rod. The problem is they don’t have a snug fit, so loosening and tightening can be very difficult as you have to have the perfect angle. It is a good universal tool to have in your toolbox to use in a pinch, but not a replacement for a real inner tie rod kit
JAMES MARTIN
June 1, 2025
I rented 2 different steel pipe with crowfoot adapter type tools from local parts stores but neither worked. Even though the correct size crowfoot size was used, it would just slip around the nut when pressure was applied.I had both sides removed and new ones installed in less than 10 minutes with this universal tool.
M.Salazar
May 14, 2025
Fits in tight spaces where other tools will not .
Zen Keisha
April 1, 2025
Not able to use as should as it is very hard to get a good grip …
Carl T
March 27, 2025
I have multiple inner tie rod removers. To be completely honest, this isn't my go-to...but when you need it, you NEED it. IT SAVED MY BUTT, heres why:My sisters 2014 elantra GT 2.0 is a trooper. It hits curbs OFTEN, poor thing. The most recent time it ended up with a lower control arm that just kind of looked like a folded taco shaped pretzel. When i was down there i noticed the outer tie rod was a little bent, and the inner had lost its boot.Here is where it gets hairy. The thing does not have a slot for any wrench/tire rod tool. Literally the inner tie rod is just a round freaking ball. Confused, i first turned to google, where the consensus was to REMOVE THE RACK AND PINION AND TAKE A PIPE WRENCH TO IT ON YOUR BENCH. Aint nobody got time for that. Enter this little tool. Put a long 1/2 extension on there, with a big ratchet or breaker bar and it came right off. Got it done just as fast as the normal slip-on type inner tie rod tool. The aftermarket moog tie rods i put on thankfully had a slot for tool/wrench so installation was easy.My girlfriend drives a 99 lifted 4runner, so inner tie rods and ball joint work has become pretty much a yearly activity.
Customer
March 23, 2025
I have used this tool to remove 2 tie rods. Works well, good quality especially for the price.
Aleksandra L.
January 29, 2025
Good product
ãŠã˜ã¡ã‚ƒã‚“
December 20, 2024
軽自動車ã§ä½¿ç”¨ã€‚レビューã§ãƒ€ãƒ¡ã¿ãŸã„ãªäº‹ã‚’見ã¾ã—ãŸãŒã€ç¡¬ãã—ã¾ã£ã¦ã„ãŸãƒ©ãƒƒã‚¯ã‚¨ãƒ³ãƒ‰ãŒæ»‘らãšå¤–ã‚Œã¾ã—ãŸã€‚ã¡ã‚‡ã£ã¨å™›ã¿è¾¼ã¾ã›ã‚‹ãƒã‚¤ãƒ³ãƒˆã‚’見ã¤ã‘ã‚‹ã¨ã‚ºãƒ¬ãªã„ã§ã™ã€‚使用後ã®å±±ã‚‚ã—ã£ã‹ã‚Šæ®‹ã£ã¦ãŠã‚Šä½•åº¦ã‚‚使ãˆãã†ã§ã™ã€‚(機会ã¯å°‘ãªã„ãŒ)
ROB
December 19, 2024
I ordered this and the other type with a clamp. I didn't use the other type as this was easier. I used it in a Mk7 honda accord ctdi, no problems, I used 3/8 extensions but I'd recommend 1/2 extension bars and a breaker bar, the tie rods were on very tight and I thought I'd snap the extension bars.The actual tool is solid and gave no problems, 5*****
Jake
December 6, 2024
Used to remove a couple of stubborn inner rods on my mk8 honda civic. Was a bit fiddly to get it to grip and there is a knack to this! But managed to get them off easily enough with a breaker bar and some force.
Recommended Products
$39.99
$ 16 .99 $16.99
$68.22
$ 31 .99 $31.99