extra heavy duty, well built and easy to install. The only thing I would have prefer if it had a dust cover when not in use.probably took 30 minutes to install.

This will fit a 2019 Ram Classic 1500 Warlock although it says it will not. First of all, it is made with good quality. The installation was super easy and if you don't understand the directions, there are several videos out there on YouTube to help out. However; the torque rating on this hitch is absurdly high 380 lbs for the M14 (main bolt) and 110lb (Two other bolts). I have a torque wrench that only goes to 150 lbs and I could not find any others that went higher than 250lbs. Using my wrench it was difficult to tighten the main bolt. I borrowed one from O'Reilly's near me and I couldn't even get the main bolt to 250lbs. As I started torquing it, the head where the hex socket goes started to strip out and so I stopped at about 200 lbs. I researched OEM hitch torque specs and they aren't even close to being this high. I called Curt and they said the torque the main bolt to 320lbs which is extremely difficult with the hex socket. All in all this hitch seems great, I'm not sure the torque specs are right though, seem really high.

This had to be the easiest hitch I have ever installed and I used to install them at our local Chevy dealer. I had it installed on my truck in about 15 minutes and that included filming it for my YouTube channel. I have only pulled a trailer once with it, but it performed admirably! I installed this on a 2017 Ram 1500 Express!!!

Fit exactly and easy to install

Great quality, fast shipping. Super easy install and good instructions.

This hitch receiver is very high quality. Solid construction, nice big hardware, and very simple to install.I did the install by myself in under 30 minutes, but I did have to go to the hardware store to pick up the 1/2 inch Allen wrench which some others also did not have handy. The lack of this somewhat specialized tool is why I'm giving this 4 stars instead of 5. I wish this tool came with the purchase to avoid finding one after the install was mostly complete. I just torqued the rear two nuts and will get to the main bolt before I tow anything.ProTip - if you don't have a buddy nearby, use a jack to hold the receiver in place while installing. I used a 2 1/2 ton floor jack which was obviously overkill, but it kept it in place while using the fish wire.I think on some trucks it may be more difficult than on the Ram, the tube that needs to be fished is really big so the coil easily goes through the back and up the sides, then you can put the coil through the plate and then torque the bolt into the coil, then pull the wire back through the tube. Don't release the coil off of the bolt too quickly though, just take two or three threads off and start to put the nut on, then carefully take off more threads of the coil as you spin the nut onto the bolt. If you drop that bolt you are going to have to drop the whole bumper frame off to get it out - not my idea of a good time. Luckily if you think it through, and pay attention (and watch the video on youtube if you still don't feel comfortable) it's really easy.Great product, great price.****Update***I called Curt Manufacturing regarding the torque values as the 250 lb-ft seemed high for the 3/4 inch bolt. It turns out in June they updated these values to be even higher! the 1/2 inch nuts should be torqued to 110 lb-ft and the 3/4 inch bolt should be torqued to 380 lb-ft!

I was told by 4 sellers on different websites that this hitch didn't fit my 2004 Dodge Ram Hemi Sport, or the SRT 10 or the Rumble Bee. I knew that my rear bumper was exactly the same as all of the other Dodge Ram trucks from 11-02 on so, I wondered what all the fuss was about as to why this wouldn't work........? After careful inspection underneath my vehicle I discovered what all of the fuss was about as to why this wouldn't work on a Hemi Sport, SRT 10 or a Rumble Bee, and they are correct it wont work......UNLESS.....you are willing to make one simple 20 to 30 minute modification at the rear fascia bracket.Hemi Sport, SRT 10, and Rumble Bee,......well I am assuming that the SRT 10 and Rumble Bee are a no fit for the same reason, I can only really say for sure on my vehicle, which is a 2004 Ram Hemi Sport, but the rear fascia bracket that holds on the rear fascia SPORT trim will get in the way of the two bumper bolts that hold the hitch on. So i made a simple modification to the bracket by drilling two one inch holes in the bracket so the bracket would fir in the same place, and the bolts would protrude through the holes that were drilled. I have included pictures if you are willing to do this modification. I feel anyone with the mechanical ability to install this hitch should also be able to modify the rear fascia bracket in this manner or similar.1. I marked the location of the receiver bolts with a white grease pencil2. Drilled a 1 inch hole with a metal hole saw positioning the hole saw where it would drill to the top edge.3. Repositioned the hole saw to take out the bottom edge4. You can file this square, or on a bench grinder, grind both sides of the drilled opening square on the side of the grinder wheel. I just left as is since no one will be down there looking at it, and i do mean no one, not even me.With this simple two hole modification, the rear fascia SPORT trim still looks the same as if it hasn't even been touched. Without this two hole drilling modification, the receiver bolts will push out the rear fascia trim bracket, and the rear SPORT trim would look all twisted and funky.The modification works. The SPORT trim looks as it should and now I can use my 2004 Dodge Ram Hemi Sport to haul my utility trailer from a reasonably level position, with a 2 in. drop receiver, instead of a drastic incline from a ball in the rear bumper hole. I was told by some I would need to take the factory bumper off and put on a 300 dollar..... or more.... from some dealers a bumper hitch designed for the Hemi Sport instead of this 50 something dollar one that will fit with a simple modification........Well I understand where they are coming from. Everything is suppose to be a perfect bolt on right......? or it won't work......C'mon......whatever happened to Yankee Ingenuity......?Anyway the pics show what i had to do, and right out of the box i could tell this was a top quality hitch. The fit is perfect and the finish is one of the best I have seen on a hitch anywhere. It screams durability. Glad I made the purchase, and after my investigation as to why I was told it wouldn't fit my truck,I knew the simple modification was all the truck needed to make it work. Saved me 250 or so dollars and it works wonderfully.

This fits perfectly in 2006 Dodge Ram 1500. Very good quality. Installed without difficulty by myself. I’m not an expert mechanic but I got it right by following step by step as instructed by its manual. Made in USA 🇺🇸

So... I read all the reviews before purchasing this product because the Amazon icon under the product says it did not fit my vehicle. My vehicle is a 2021 Dodge Ram Classic with crew cab and night edition if that matters. This hitch is correct for my vehicle and it was the one they recommended at Napa but $80 cheaper on Amazon.I want to address some of the things I read in the other reviews. First, I did not need to lower the spare tire but depends what you plan to tighten the nuts with. I used a large wrench which will tighten better than a socket anyways. Next, once you fish the bolts threw, (which was easy) use a set of needle nose to hold the bolt until you get the nut started. Not sure how you could lose the bolt in the frame unless it falls back in after you take the fish wire off. I call bs on anyone saying the wire broke. Next, people complain the kit does not include the cap for the hitch ball cover. You just reuse the one on the truck, unless it's missing on your truck. Sorry that's on you. Can get them at the dealership I'm sure.2 things I didn't like, the main bolt that comes down threw the bumper hitch hole is a hex. I didn't have one that big so had to buy one. Think I remember it being 1/2. No big deal, makes sense being inset so the cover fits back on.But the biggest problem was this is less than a 1 beer task to install. I think Curt should really get a couple more steps in there instructions so it can be at least a 1 beer job, 2 beer job would be even better. What I'm saying is it is super fast and easy to install.Thanks

Massiv gearbeitet. Gut lackiert. Aber Front schräg zusammengeschweißt ... US Qualität! Musste bei Montage Wagenheber benutzen um bei der 2. Bohrung die Löcher in Deckung zu bringen. Rest war dann superleicht montiert!

I installed this hitch on a 2021 Dodge Ram 1500 Classic. Nice overall build quality, tucks up neatly under the bumper. Total install time is no more than a half hour from start to finish.The fish wire is easy to use and if you keep the top bolt loose the weight of the receiver will hold the fished bolts in place to allow the nuts to get spun on.There are a couple of complaints with the top bolt not allowing the plastic hitch cap to be reinstalled. I didn't have that issue. Everything fit back together nicely.Good value for money.

This product fit Perfectly on my Ram 1500 Classic 2019. Similar item from the Ram dealership was twice the price. Quality is flawless, construction and finish is excellent.Installation was very easy and quick.I have already towed a 6’X12’ U-haul trailer with it for 800km. No problem at all.I would certainly recommend this product.

Very good product and serves its purpose alright. Watched the installation video on youtube and it was pretty easy to install (less than Overall, its a very good product! Would 100% recommend. If you have the tools, save yourself the money and do it yourself.